The 175mm Deep Wide Concrete Floor Beam is a versatile structural solution engineered for projects requiring larger spans and higher load-bearing capacities than a standard section allows. These WIDE section beams are wet-cast in steel moulds, ensuring exceptional dimensional accuracy and a superior finish with minimal initial camber.
This wide-profile beam is specifically designed to offer greater design flexibility, capable of spanning up to 6.5 metres. It is frequently used to complement standard 175mm beams, allowing for optimised layouts where higher imposed loads—such as internal partitions or larger room spans—are required. Whether for a high-specification domestic build or a light commercial application, this beam provides a robust and reliable foundation that complies with all relevant UK Building Regulations.
Key Features and Benefits
Increased Span Capacity: Able to clear spans up to 6.5 metres, making it an ideal alternative to standard sections for larger open-plan areas.
Enhanced Load Distribution: The wider profile supports greater imposed loads, often reducing the necessity for additional intermediate supporting walls.
Precision Wet-Cast Finish: Manufactured in steel moulds to provide a smooth, professional finish and consistent tolerances for better block seating.
Versatile Integration: Fully compatible with standard 100mm infill blocks or the high-performance Rackham TS thermal insulation system.
Efficient Installation: The wider section can help reduce the total number of units required for a layout, simplifying the installation and speeding up the grouting process.
Inc VAT!
This concrete rebar is a standard reinforcing steel rod designed to strengthen and hold the concrete together as a tension device in concrete structures.
Rebar is commonly used in the construction industry within domestic ‘DIY’ and commercial projects of varying sizes. Its primary function is to improve the tensile strength of concrete and to balance load through slabs, columns, beams, and other structural elements.
While reinforcement bar is not often supplied galvanized or epoxy-coated, hot rolled bars commonly leave the mill with a thin coating of mill-scale (iron oxides), which helps to protect the steel.
After a time, this coating will dissipate, and surface rust can appear due to environmental factors. Rust that is caused by freshwater (rainwater) does not, however, decrease the inherent strength of the rebar, nor will it lead to further deterioration of the bar when cast in concrete.
If you would like any more information on this product, please call the number at the top of this page and speak to our super-efficient sales team now!
Kennings carry an extensive range of both concrete and steel lintels for everyday building use. Our lintels can be used for internal and external applications and are suitable for all construction methods: solid wall, timber frame or brick and block. Many are held as stock items, with any special orders being something we can source and supply with very short lead times.Stressline internal solid wall steel lintels are galvanised steel ‘box’ type lintels designed for internal walls of 75mm to 150mm in width. Internal solid wall lintels are designed for 75mm, 100mm or 140-150mm wide, non-load bearing and load-bearing walls.Stressline internal solid wall steel lintels are designed to support concrete floor loads, masonry loads, timber floor joists and/or roof trusses, attic truss loads and point loads (compound trusses, steel beams).We can deliver from branch stock or direct to the site depending upon the quantities required for your building project.If you need any assistance, please do not hesitate to call the number at the top of this page and speak with one of our super-efficient sales staff who will be more than happy to provide further information on loading capacities and lengths etc.
Kennings carry an extensive range of both concrete and steel lintels for everyday building use. Many are held as stock items, with any special orders being something we can source and supply with very short lead times. Our lintels can be used for internal and external application and are suitable for all construction methods: solid wall, timber frame or brick and block.Single leaf external solid wall lintels are split into three types. MB (Meter Box), TR (Tray) and CH (Channel.) The MB type is generally specified for carrying masonry over the opening formed for a meter box and typically this would be in the outside leaf of an external cavity wall. The TR is very similar in its functionality.We can deliver from branch stock or direct to site depending upon the quantities required for your building project.If you need any assistance, please do not hesitate to call the number at the top of this page and speak with one of our super efficient sales staff who will be more than happy to provide further information on loading capacities and lengths etc.
Kennings carry an extensive range of both concrete and steel lintels for everyday building use.
Stressline SL200 BOX external solid wall steel lintels are easy to install and the galvanised finish means they are tough and durable boasting impressive thermal efficiency. This range of BOX lintels are designed for heavy loads on a 19:1 ratio.
Our lintels can be used for internal and external applications and are suitable for all construction methods: solid wall, timber frame or brick and block.
The SL200 BOX range of lintels are equivalent to the following lintels produced by other manufacturers:
Many are held as stock items, with any special orders being something we can source and supply with very short lead times.We can deliver from branch stock or direct to the site depending on your building project's quantities.If you need any assistance, please do not hesitate to call the number at the top of this page and speak with one of our super-efficient sales staff who will be more than happy to provide further information on loading capacities and lengths etc.
A142 Reinforcing Mesh is a High Tensile Mild Steel Reinforcing Concrete Mesh that is used to help concrete withstand tension force.
Although the concrete is strong enough by nature to withstand compression force, it can also crack from load bending tensile force. Therefore, it needs help resisting the tensile stress, using high tensile substance.
A142 mesh is often used in light duty domestic concreting in floor slabs and foundations with a thickness or depth of 100mm.
The most common uses for A142 mesh are pathways, driveways and garage bases (depending on the vehicle size and traffic levels).
1a Hook Road, Goole, East Yorkshire, DN14 5JB
Seavy Road, Goole, East Yorkshire, DN14 6TA
Slipper Bridge Works, Main Road, Nr Gilberdyke, DN14 7XL
