Dampstop is a studded polypropylene damp proofing Mesh membrane 2.8mm in thickness. It is fixed to damp, salt contaminated walls using plugs, with the studs facing the wall, which creates an air gap. The mesh can be dot and dab plaster-boarded or directly rendered. Dampstop creates a warm wall to reduce condensation and creates a barrier against harmful salts. Allows quicker redecoration than a traditional sand/cement Plaster and a physical barrier. To be used in conjunction with Wykamol Ultracure Damp cream to complete the system.

Kit Includes:
X1 Roll Mesh 1M x 10M
x1 Tape 28mm x 2mm x 22.5M
x100 Plugs With Seals

Whatever your damp proofing needs, here at Kennings, we have a number of market-leading products to help you achieve the perfect solution. Browse our full range of damp proofing products online for other competitive deals.

If you would like any more information on this product, please call the number at the top of this page and speak to our super efficient sales team now!
 

• 1mx10m
• 2.8mm thickness
• 1 x Roll Mesh 1M x 10M
• 1 x Tape 28mm x 2mm x 22.5M
• 100 x Plugs With Seals

• Studded polypropylene

Salt Neutraliser is an aqueous solution based on Ethanoic Acid with a surfactant. It has been specifically developed to overcome the problem of salts in mineral building surfaces. Salt Neutraliser is a surface treatment used to neutralise the harmful effects of salt to protect the plaster finish, especially after a damp-proofing course application.

Whatever your damp proofing needs, here at Kennings, we have a number of market-leading products to help you achieve the perfect solution. Browse our full range of damp proofing products online for other competitive deals.

If you would like any more information on this product, please call the number at the top of this page and speak to our super efficient sales team now!

• 5ltr

• Surface treatment
• Ethanoic Acid
• Neutralise the harmful effects of salt

The KA Tanking Slurry waterproofing system provides a solution to water leakage, ingress or seepage in concrete structures or any cementitious substrate. The formation and development of insoluble crystals into water bearing capillaries and fissures effectively block the further.

The KA system is designed to function against water penetration in various conditions. KA Tanking Slurry is supplied as a powder and, when mixed with water, is applied directly to concrete, blockwork masonry, or cement renders in areas where general waterproofing is required. KA Tanking Slurry is used in conjunction with KA Super Plug for instant leak plugging.

KA tanking Slurry can be applied to new or old structurally sound surfaces. It can be applied either to the negative or the positive side and will negate dampness in groundwater permeation even under hydrostatic pressure.

If you would like any more information on this product, please call the number at the top of this page and speak to our super efficient sales team now!

• Size: 25kg
• Colour: Grey

• Fish Ponds
• Slurry Pits
• Drinking-Water Tanks
• Bathrooms
• Kitchens
• The list goes on!....

Thompsons One Coat Damp Seal is a high-performance interior seal developed to form a breathable, obliterating membrane that seals and permanently stops the reappearance of damp, water and other household stains.

Suitable for application to both dry and damp walls and ceilings, the micro-porous formulation allows trapped moisture to evaporate to prevent paint from flaking or wallpaper from peeling off. Full coverage can be achieved in just one coat, ensuring the surface is prepared for decoration in as little as 4 hours.

If you would like any more information on this product, please call the number at the top of this page and speak to our super efficient sales team now!

Browse our full range of building chemicals online for other competitive deals on grout, sealants, additives, etc.

• Application: Brush.
• Coverage Approx: 5M2 per L
• Required number of coat: 1
• Drying time Approx: 2-3 hours
• Protection Level: High

• Smooth White Finish

Wykamol Ultracure Damp Proof Cream is a unique cream for injection into brickwork, etc., to control rising dampness. Ultracure can be used in all types of masonry without the use of high-pressure equipment. 

Whatever your damp proofing needs, here at Kennings, we have a number of market-leading products to help you achieve the perfect solution. Browse our full range of damp proofing products online for other competitive deals.

If you would like any more information on this product, please call the number at the top of this page and speak to our super efficient sales team now!

• 380ml

• Use without high pressure equipment
• Controls Rising Damp

Wykamol Ultracure Damp Proof Kit has everything you need to provide a safe new chemical damp proof course. Requires no specialist equipment and quick DPC injection. Field research has shown that Ultracure performs just as well as any conventional liquid injection system, aiming to control rising dampness. During the curing process, which starts immediately, a low molecular weight silane vapour is produced and gives excellent migration through the walls, and polysiloxanes are formed.

Kit Includes:
x8 380ml Cartridges of Damp Proofing Ultracure Cream*
x1 Professional Gun
x1 12 x 250 SDS Drill Bit
x1 12 x 160 SDS Drill Bit
x1 Pair of Disposable Gloves
x1 User Guide

Whatever your damp proofing needs, here at Kennings, we have a number of market-leading products to help you achieve the perfect solution. Browse our full range of damp proofing products online for other competitive deals.

If you would like any more information on this product, please call the number at the top of this page and speak to our super efficient sales team now!
 

• 8 x 380ml Cartridges of Damp Proofing Ultracure Cream*
• 1 x Professional Gun
• 1 x 12 x 250 SDS Drill Bit
• 1 x 12 x 160 SDS Drill Bit
• 1 x Pair of Disposable Gloves
• 1 x User Guide

• Chemical damp proof course
• No specialist equipment required